EPC | About us
HKJ Series Ring Die Granulator
- Production capacity： 1-5t/h
- Applicable materials： Pelletized feed, expansive feed, extruded feed, tablet feed, etc.
- Applications： Feed mill, etc.
Classification:
Tel：
Introduction
-
Granulator is also called granulator, granulator, etc. There are two types of flat-mode pellet machines and ring-type pellet machines. The ring-type pellet machine is divided into gear-driven pellet machines from the transmission structure.
(CPM) and belt-driven pellet mills (UMT).
1. The main components of the flat die granulator are a flat round steel die and a set (2-4) of freely rotating pressing rollers with grooves. The raw material falls into the roller gap from top to bottom and is rotated
The pressing roller presses into the die hole, extrudes a long cylindrical object from the bottom of the die hole, and is cut into granules by a cutter. There are three transmission modes: drive roller, drive flat die and double drive. flat die press
The utility model has the advantages of simple structure, easy manufacture and low cost, and is suitable for pressing fibrous raw materials. However, the linear velocity (circumferential velocity) of the inner and outer diameters of the flat die is not equal during pelletizing, and it is concerned with the
The raw materials are subjected to centrifugal forces of different sizes, so that the load on the working surface is uneven. Therefore, the diameter of the flat die should not be too large, otherwise it will affect the uniformity of the finished product.
2. Ring die granulator and its working principle The ring die is a porous cylindrical cylinder, which is rotated by transmission. There are 2-4 free-rotating or driven auto-rotating rollers with grooves in the cylinder. The raw material enters the mold, that is, the rotating pressure roller is pressed into the workshop, embedded in the mold hole, extruded from the outer wall of the ring, and cut into cylindrical particles by the cutter
The main feature of the ring die granulator is that the linear speeds of the ring die and the pressing roller are equal everywhere. No extra friction,
All the pressure is used for granulation, so the efficiency is high. The ring die granulator is further divided into the difference between the ring die granulator and the vertical ring die In the mold, the vertical ring mold is placed flat, with the mouth facing upward, and directly enters the pelletizing mold from top to bottom. 2. Pressing method: The ring die is rotated by the die, the pressing wheel does not move, and rotates at high speed. The vertical ring die is that the pressure wheel rotates, and the die does not move.
-
1. It has the unattainable performance of traditional double belt drive and gear drive granulator;
2. The forged one-piece main shaft cancels the support rod of the pressing roller, and the main shaft is optimized, which greatly increases the rigidity of the main shaft and the supporting rigidity of the pressing roller. The parallelism of the heart, the equipment is aging, and the output is not reduced; the output is increased by 10-12% year-on-year, and the number of equipment maintenance is reduced;
3. Automatic refueling when the machine is turned on, the refueling time and refueling amount can be arbitrarily set by the user according to the oil and material conditions, so as to avoid major damage to the machine due to operator errors;
4. Stainless steel movable door, durable;
5. Pneumatic quick emergency discharge door to avoid burning out the motor or causing equipment damage;
6. Forged hollow shaft, durable;
7. Configuration: SKF bearing, Siemens motor, Schneider Electric, on-site touch screen operation cabinet.
-
The working principle of the HKJ series biomass granulator of straw animal husbandry machinery is similar to that of the SZLH series animal feed granulator. The action of the scraper is used to feed the two pressing zones in the ring die evenly into the wedge-shaped space formed by the two pressing rollers and the ring die. Extruded into the die hole of the ring die and formed in the die hole. Since the extrusion of the material between the die and the roller is continuous, the formed material is continuously discharged from the die hole in a columnar shape, and then cut into particles of the required length by the cutter, and then enters the next process.
Finished pellets
undefined
Features
-
- Commodity name: HKJ Series Ring Die Granulator
- Production capacity: 1-5t/h
- Applicable materials: Pelletized feed, expansive feed, extruded feed, tablet feed, etc.
- Applications: Feed mill, etc.
Granulator is also called granulator, granulator, etc. There are two types of flat-mode pellet machines and ring-type pellet machines. The ring-type pellet machine is divided into gear-driven pellet machines from the transmission structure.
(CPM) and belt-driven pellet mills (UMT).
1. The main components of the flat die granulator are a flat round steel die and a set (2-4) of freely rotating pressing rollers with grooves. The raw material falls into the roller gap from top to bottom and is rotated
The pressing roller presses into the die hole, extrudes a long cylindrical object from the bottom of the die hole, and is cut into granules by a cutter. There are three transmission modes: drive roller, drive flat die and double drive. flat die press
The utility model has the advantages of simple structure, easy manufacture and low cost, and is suitable for pressing fibrous raw materials. However, the linear velocity (circumferential velocity) of the inner and outer diameters of the flat die is not equal during pelletizing, and it is concerned with the
The raw materials are subjected to centrifugal forces of different sizes, so that the load on the working surface is uneven. Therefore, the diameter of the flat die should not be too large, otherwise it will affect the uniformity of the finished product.
2. Ring die granulator and its working principle The ring die is a porous cylindrical cylinder, which is rotated by transmission. There are 2-4 free-rotating or driven auto-rotating rollers with grooves in the cylinder. The raw material enters the mold, that is, the rotating pressure roller is pressed into the workshop, embedded in the mold hole, extruded from the outer wall of the ring, and cut into cylindrical particles by the cutter
The main feature of the ring die granulator is that the linear speeds of the ring die and the pressing roller are equal everywhere. No extra friction,
All the pressure is used for granulation, so the efficiency is high. The ring die granulator is further divided into the difference between the ring die granulator and the vertical ring die In the mold, the vertical ring mold is placed flat, with the mouth facing upward, and directly enters the pelletizing mold from top to bottom. 2. Pressing method: The ring die is rotated by the die, the pressing wheel does not move, and rotates at high speed. The vertical ring die is that the pressure wheel rotates, and the die does not move.
-
1. It has the unattainable performance of traditional double belt drive and gear drive granulator;
2. The forged one-piece main shaft cancels the support rod of the pressing roller, and the main shaft is optimized, which greatly increases the rigidity of the main shaft and the supporting rigidity of the pressing roller. The parallelism of the heart, the equipment is aging, and the output is not reduced; the output is increased by 10-12% year-on-year, and the number of equipment maintenance is reduced;
3. Automatic refueling when the machine is turned on, the refueling time and refueling amount can be arbitrarily set by the user according to the oil and material conditions, so as to avoid major damage to the machine due to operator errors;
4. Stainless steel movable door, durable;
5. Pneumatic quick emergency discharge door to avoid burning out the motor or causing equipment damage;
6. Forged hollow shaft, durable;
7. Configuration: SKF bearing, Siemens motor, Schneider Electric, on-site touch screen operation cabinet.
-
The working principle of the HKJ series biomass granulator of straw animal husbandry machinery is similar to that of the SZLH series animal feed granulator. The action of the scraper is used to feed the two pressing zones in the ring die evenly into the wedge-shaped space formed by the two pressing rollers and the ring die. Extruded into the die hole of the ring die and formed in the die hole. Since the extrusion of the material between the die and the roller is continuous, the formed material is continuously discharged from the die hole in a columnar shape, and then cut into particles of the required length by the cutter, and then enters the next process.
Working Principle
-
- Commodity name: HKJ Series Ring Die Granulator
- Production capacity: 1-5t/h
- Applicable materials: Pelletized feed, expansive feed, extruded feed, tablet feed, etc.
- Applications: Feed mill, etc.
Granulator is also called granulator, granulator, etc. There are two types of flat-mode pellet machines and ring-type pellet machines. The ring-type pellet machine is divided into gear-driven pellet machines from the transmission structure.
(CPM) and belt-driven pellet mills (UMT).
1. The main components of the flat die granulator are a flat round steel die and a set (2-4) of freely rotating pressing rollers with grooves. The raw material falls into the roller gap from top to bottom and is rotated
The pressing roller presses into the die hole, extrudes a long cylindrical object from the bottom of the die hole, and is cut into granules by a cutter. There are three transmission modes: drive roller, drive flat die and double drive. flat die press
The utility model has the advantages of simple structure, easy manufacture and low cost, and is suitable for pressing fibrous raw materials. However, the linear velocity (circumferential velocity) of the inner and outer diameters of the flat die is not equal during pelletizing, and it is concerned with the
The raw materials are subjected to centrifugal forces of different sizes, so that the load on the working surface is uneven. Therefore, the diameter of the flat die should not be too large, otherwise it will affect the uniformity of the finished product.
2. Ring die granulator and its working principle The ring die is a porous cylindrical cylinder, which is rotated by transmission. There are 2-4 free-rotating or driven auto-rotating rollers with grooves in the cylinder. The raw material enters the mold, that is, the rotating pressure roller is pressed into the workshop, embedded in the mold hole, extruded from the outer wall of the ring, and cut into cylindrical particles by the cutter
The main feature of the ring die granulator is that the linear speeds of the ring die and the pressing roller are equal everywhere. No extra friction,
All the pressure is used for granulation, so the efficiency is high. The ring die granulator is further divided into the difference between the ring die granulator and the vertical ring die In the mold, the vertical ring mold is placed flat, with the mouth facing upward, and directly enters the pelletizing mold from top to bottom. 2. Pressing method: The ring die is rotated by the die, the pressing wheel does not move, and rotates at high speed. The vertical ring die is that the pressure wheel rotates, and the die does not move.
-
1. It has the unattainable performance of traditional double belt drive and gear drive granulator;
2. The forged one-piece main shaft cancels the support rod of the pressing roller, and the main shaft is optimized, which greatly increases the rigidity of the main shaft and the supporting rigidity of the pressing roller. The parallelism of the heart, the equipment is aging, and the output is not reduced; the output is increased by 10-12% year-on-year, and the number of equipment maintenance is reduced;
3. Automatic refueling when the machine is turned on, the refueling time and refueling amount can be arbitrarily set by the user according to the oil and material conditions, so as to avoid major damage to the machine due to operator errors;
4. Stainless steel movable door, durable;
5. Pneumatic quick emergency discharge door to avoid burning out the motor or causing equipment damage;
6. Forged hollow shaft, durable;
7. Configuration: SKF bearing, Siemens motor, Schneider Electric, on-site touch screen operation cabinet.
-
The working principle of the HKJ series biomass granulator of straw animal husbandry machinery is similar to that of the SZLH series animal feed granulator. The action of the scraper is used to feed the two pressing zones in the ring die evenly into the wedge-shaped space formed by the two pressing rollers and the ring die. Extruded into the die hole of the ring die and formed in the die hole. Since the extrusion of the material between the die and the roller is continuous, the formed material is continuously discharged from the die hole in a columnar shape, and then cut into particles of the required length by the cutter, and then enters the next process.
Technical parameters
-
- Commodity name: HKJ Series Ring Die Granulator
- Production capacity: 1-5t/h
- Applicable materials: Pelletized feed, expansive feed, extruded feed, tablet feed, etc.
- Applications: Feed mill, etc.
Granulator is also called granulator, granulator, etc. There are two types of flat-mode pellet machines and ring-type pellet machines. The ring-type pellet machine is divided into gear-driven pellet machines from the transmission structure.
(CPM) and belt-driven pellet mills (UMT).
1. The main components of the flat die granulator are a flat round steel die and a set (2-4) of freely rotating pressing rollers with grooves. The raw material falls into the roller gap from top to bottom and is rotated
The pressing roller presses into the die hole, extrudes a long cylindrical object from the bottom of the die hole, and is cut into granules by a cutter. There are three transmission modes: drive roller, drive flat die and double drive. flat die press
The utility model has the advantages of simple structure, easy manufacture and low cost, and is suitable for pressing fibrous raw materials. However, the linear velocity (circumferential velocity) of the inner and outer diameters of the flat die is not equal during pelletizing, and it is concerned with the
The raw materials are subjected to centrifugal forces of different sizes, so that the load on the working surface is uneven. Therefore, the diameter of the flat die should not be too large, otherwise it will affect the uniformity of the finished product.
2. Ring die granulator and its working principle The ring die is a porous cylindrical cylinder, which is rotated by transmission. There are 2-4 free-rotating or driven auto-rotating rollers with grooves in the cylinder. The raw material enters the mold, that is, the rotating pressure roller is pressed into the workshop, embedded in the mold hole, extruded from the outer wall of the ring, and cut into cylindrical particles by the cutter
The main feature of the ring die granulator is that the linear speeds of the ring die and the pressing roller are equal everywhere. No extra friction,
All the pressure is used for granulation, so the efficiency is high. The ring die granulator is further divided into the difference between the ring die granulator and the vertical ring die In the mold, the vertical ring mold is placed flat, with the mouth facing upward, and directly enters the pelletizing mold from top to bottom. 2. Pressing method: The ring die is rotated by the die, the pressing wheel does not move, and rotates at high speed. The vertical ring die is that the pressure wheel rotates, and the die does not move.
-
1. It has the unattainable performance of traditional double belt drive and gear drive granulator;
2. The forged one-piece main shaft cancels the support rod of the pressing roller, and the main shaft is optimized, which greatly increases the rigidity of the main shaft and the supporting rigidity of the pressing roller. The parallelism of the heart, the equipment is aging, and the output is not reduced; the output is increased by 10-12% year-on-year, and the number of equipment maintenance is reduced;
3. Automatic refueling when the machine is turned on, the refueling time and refueling amount can be arbitrarily set by the user according to the oil and material conditions, so as to avoid major damage to the machine due to operator errors;
4. Stainless steel movable door, durable;
5. Pneumatic quick emergency discharge door to avoid burning out the motor or causing equipment damage;
6. Forged hollow shaft, durable;
7. Configuration: SKF bearing, Siemens motor, Schneider Electric, on-site touch screen operation cabinet.
-
The working principle of the HKJ series biomass granulator of straw animal husbandry machinery is similar to that of the SZLH series animal feed granulator. The action of the scraper is used to feed the two pressing zones in the ring die evenly into the wedge-shaped space formed by the two pressing rollers and the ring die. Extruded into the die hole of the ring die and formed in the die hole. Since the extrusion of the material between the die and the roller is continuous, the formed material is continuously discharged from the die hole in a columnar shape, and then cut into particles of the required length by the cutter, and then enters the next process.
Tel：
Related Equipment
Organic fertilizer production line
Slag name
Organic fertilizer and detailed text
Water soluble fertilizer
Inquiry
