Products

Home page

LSCC series cyclone dust collector

Production capacity： Handling air volume: 2000-18000m3/h
Applicable materials： Coarse, large dust particles, etc.
Applications： Occasions where the dust removal efficiency is not high; when the air dust content is very high, etc.

Classification:

Ranch central kitchen equipment

Tel：

+86-15993745555

Inquiry

Introduction
Finished pellets
Features
Working Principle
Technical parameters
Case
Related Equipment

Introduction

When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder. Laser cutting material, smooth inner wall, paint, beautiful appearance, good dust removal effect.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder.
For more product details: please call 15993745555

Finished pellets

undefined

Features

- Commodity name: LSCC series cyclone dust collector
- Production capacity: Handling air volume: 2000-18000m3/h
- Applicable materials: Coarse, large dust particles, etc.
- Applications: Occasions where the dust removal efficiency is not high; when the air dust content is very high, etc.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder. Laser cutting material, smooth inner wall, paint, beautiful appearance, good dust removal effect.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder.
For more product details: please call 15993745555

Working Principle

- Commodity name: LSCC series cyclone dust collector
- Production capacity: Handling air volume: 2000-18000m3/h
- Applicable materials: Coarse, large dust particles, etc.
- Applications: Occasions where the dust removal efficiency is not high; when the air dust content is very high, etc.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder. Laser cutting material, smooth inner wall, paint, beautiful appearance, good dust removal effect.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder.
For more product details: please call 15993745555

Technical parameters

- Commodity name: LSCC series cyclone dust collector
- Production capacity: Handling air volume: 2000-18000m3/h
- Applicable materials: Coarse, large dust particles, etc.
- Applications: Occasions where the dust removal efficiency is not high; when the air dust content is very high, etc.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder. Laser cutting material, smooth inner wall, paint, beautiful appearance, good dust removal effect.
When the air with higher dust content enters along the tangential direction of the outer cylinder at a higher speed, it rotates from top to bottom between the inner and outer cylinders and the cone part. During the rotation, the dust particles are thrown towards the wall due to the inertia centrifugal force many times larger than that of the air. When the dust particles come into contact with the wall, they lose the inertial force and fall along the wall, and are discharged through the ash discharge port. The top-to-bottom swirling airflow, except for a part of which is gradually discharged from the outside to the inside through the inner cylinder in the middle of the process, the other part moves closer to the center of the cone with the contraction of the cone, and when it approaches the lower end of the cone, it again It begins to spiral upward to form a bottom-up swirling airflow, which is then discharged through the inner cylinder.
For more product details: please call 15993745555